Please contact the customer service so that they can supply you with a suitable power cable.

When changing from a be quiet Pure Power 11 500W to a 700W model, the pin assignment of the cables generally remains the same. There are a few important points to note here: - The cables such as ATX motherboard (20+4-pin), P4+4 (CPU), and the PCI-Express cables have the same pin assignment and are therefore compatible. - However, the number and type of cables may vary, especially for the PCI Express connectors, as the 700W model provides more PCI Express connectors for multi-GPU systems. - The cables on both models are equipped with premium black sleeves and have flat rate cables for the PCI Express and drive connections, which makes installation and cable management easier. So you don't need to buy new cables unless you need additional PCI Express connectors, which are supplied with the 700W model.

The pin assignment of the cables is usually identical for be quiet! power supply units of the same series. This means: The existing cables of the 500W model should generally also be compatible with the 700W model. It is not normally necessary to replace all cables.

Der Hersteller führt dies auf seiner Website auf https://www.bequiet.com/de/powersupply/1543 https://www.bequiet.com/admin/ImageServer.php?ID=1498ba18402@be-quiet.net&rand=208b5578f51ec8aa8141e65efd2a4722&lang=2&force=true&download=true&omitPreview=true https://www.bequiet.com/admin/ImageServer.php?ID=48fd7a18341@be-quiet.net&rand=6310436583815cf2bd72f420e44f9fcf&lang=2&force=true&download=true&omitPreview=true https://www.bequiet.com/admin/ImageServer.php?ID=7d688a40183@be-quiet.net&rand=07e7acfb80c8453671b18dc849e7c608&lang=2&force=true&download=true&omitPreview=true

Digitec (or any other Swiss dealer) is obliged to supply electrical appliances with a Swiss plug. If the appliance is supplied with a foreign plug, a suitable replacement cable should be supplied if the mains cable is pluggable or alternatively if the mains cable is permanently connected, a suitable adapter should be supplied. If the appliance is delivered without a suitable plug, complain to the customer service and insist on a cable or an adapter, free of charge. Info Digitec --> https://helpcenter.digitec.ch/hc/de/articles/4402084170386-Fehlender-Adapter Point 1 --> https://www.esti.admin.ch/de/themen/faq/elektrische-erzeugnisse-marktueberwachung/

That seems to be more of a coincidence based on the other questions. So you have 3 options: - Wait and see what's inside (you can possibly do this directly at the checkout). - Buy one in addition - You always have 100 of these things lying around anyway. Just take one of them

It depends on what else is installed in your PC. Processor etc. I would rather change to a 700 watt power supply unit.

Hello, here you will find Tips&Tricks. https://praxistipps.chip.de/netzteil-luefter-austauschen-so-gehts_41564

Hello, for both.

I can't help you there, but I still have a power supply unit just like it in my basement. It was only in use for about 10 hours, I could send it to you.

Your alternative is the "same" power supply unit but with the suffix CM for Cable Management. So it has no cable harness, but plugs on the housing. It might look a bit "tidier", but has more contact resistance and possible weak points. I chose this power supply for a Fujitsu D3644-B mainboard because it has to cope with very different and low loads on the different outputs due to DC-DC converters. So far it does... greetings, gnasch

In my case, unfortunately, it was a German cable, I think that's the only way it's delivered.

It depends on what kind of RTX2070 and what else you need.... Not all "RTX2070" are the same. The easiest way to check which and how many connectors your desired one needs, then check with the data sheet whether there are enough: https://www.bequiet.com/admin/ImageServer.php?ID=eacd0a18467@be-quiet.net&.jpg

Writing error, replace all cm in mm then it should already fit :)